At 8 o'clock on the evening of September 23, within a few seconds, the neon flashing Beijing Wangfujing Street gradually faded. Wangfujing Bookstore, Wuyutai Tea House, China Photo Gallery... The exterior lighting of a store is also extinguished one by one. The street lights and the lighting in the store are left in the pedestrian street. The change of Wangfujing Street before and after the lights are off is obvious. But the streets are still bustling, people come and go. This is not a power failure in the Wangfujing area, but an artificial “lights out†activity. On September 23, as part of the “Energy Saving and Emission Reduction Large-scale Experience Activityâ€, including Wangfujing Street in Beijing, the most prestigious landmarks in 7 cities have faded away from the “beautiful†neon... ...
This time, Wangfujing "lights out" for half an hour. If it is only from the perspective of power saving, the harvest is really limited. According to the introduction, because the outdoor lighting in the Wangfujing area has been rebuilt and energy-saving lamps are used, "this The event has closed 10% of the lighting, saving about 1500 kWh in half an hour." And what about 1500 kWh (that is, 1500 kWh) for Beijing? Therefore, some media have called this event "light out the show".
According to reports, the choice of Wangfujing Street to experience the feeling of "blackout", the relevant departments have worked hard. As a famous commercial street in the country, Wangfujing has been dedicated to creating a beautiful night view of the city since the early 1980s. "From 'lighting' to 'lighting out' are for development, and the current development should be the scientific development of taking into account economic benefits and energy saving and environmental benefits."
In fact, the "light out show" is still an authentic "international practice." At 7:55 pm on February 1 this year, the 20,000 lamps on the Eiffel Tower in Paris, France, were all extinguished to support the Global Warming Report released on the following day; at 8:20 pm on August 22, 2005, Lights from all over Korea were extinguished collectively for 2 minutes. In this 2 minutes, the power saving is 1.5 million degrees; in Bangkok, Thailand, the 9th of each month is designated as the “Energy Saving Dayâ€. At 7:00 pm on the “Energy Saving Dayâ€, the city will be turned off for 15 minutes. It can reduce greenhouse gas emissions by 4,800 tons.
Yes, on the surface, the relationship between electricity and environmental protection is not too great. Even many people do not know that electricity use will bring serious environmental problems. But the environmental problems caused by power generation are quite serious. For example, our current electricity tariffs include corresponding environmental protection costs; for example, due to heavy dependence on coal power generation, Australia's per capita greenhouse gas emissions are among the highest in the world. The severe drought has caused water shortages in major Australian cities and forced the government to set aside its goal of curbing climate warming.
And for the natural disasters caused by excessive greenhouse gas emissions, our feelings are becoming more and more real. Sandstorms, heat waves, snow in June, and black clouds have caused whiteness to be like night. Therefore, we not only need to "light out the show", but also need to expand the scope of participation in the "light out show", and engage in the "light out show", so that we can more truly feel the environmental problems! Therefore, the "light out show" is the most worthy show!
Snowlight Optoelectronics: Differentiated Competition (Figure) A little bit of view on urban landscape lighting Mid-Autumn Festival has no positive effect on the night without lights. Don't underestimate the half-hour deduction and experience meaning from lighting up to the blackout show is a social one. A kind of progress in the show, the public's energy-saving urgency and quality
1
Medical Device Wire :The key requirements of modern medical connector include safety, reliability, small size and high speed performance. Since it is a small component in the overall design of any medical device, it can be considered that the connector is an important part of the medical equipment.
Common BV, RV line series
Silicone rubber insulated high temperature wire agr
High temperature braided wire AgRP with silicone rubber insulation and glass fiber
Silica gel high temperature control cable
Silicone rubber high voltage line agg 1kv-100kv
Teflon high voltage line 1kv-100kv
PFA Teflon insulated wire
FEP fluoroplastic high temperature line
PTFE fluoroplastic high temperature line
High temperature resistant control cable with Fluoroplastic insulation and sheath
Fire resistant and flame retardant control cable with PVC insulation sheath
Fire resistant line gn500 degree
Medical Device Wire
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com