Recently, an LED lighting company broke the news. When the company recently accepted the inspection by the local quality supervision bureau, its intelligent LED lighting products were considered to have no production standards and were fined. In fact, in March, when the company went to the Municipal Quality Supervision Bureau for the record, the other party said that no relevant national standards were not accepted, so there was no filing. This time it was fined and it was quite "resourced by the Diaoyu Islands."
The call for national standards for LED lighting is a topic that has been discussed in the industry. Although local governments have already developed and tried their own local standards, but the standards are confusing, the company is qualified according to the standards, and it has become unqualified there. The whole industry is in a mess! The government is in a dilemma. The company shakes its head and sighs. The people look at the flowers in the fog. They don’t know who is right or wrong, who is right and who is wrong, who is good and who is bad. Due to the lack of uniform specifications and standards, LED lighting applications on the market today have a wide variety of products, different performance, and poor interchangeability, which brings severe challenges to the entire industry.
The success of the LED industry standard lies in scientific
At present, there is no uniform standard for China's LED industry. More than 4,000 companies in the existing industrial chain, including 22 domestically listed companies, because there is no standard, the products are also mixed.
Yue Ruisheng, secretary-general of the International Semiconductor Lighting Alliance (ISA), said that the International Commission on Illumination, the International Electro-Electrical Committee, the European Commission for Light Engines, the US Energy Star, and the ISA are all setting standards for LED lighting to compete for industry voices. The key to the success of standards lies in science and practicality. At present, the reason why LED lighting standards have always been a bottleneck problem that plagues the development of the industry, the main reasons are: First, the semiconductor lighting industry chain is long, is the intersection of electronic information and light industrial lighting, its application is more extensive, giving Standards development and coordination have brought great challenges. Second, some of the LED standards are covered in traditional lighting products. For example, some standards for street lamps and street lamps may also be LED standards. Third, “standards†are science and technology. Based on the combined results of experience. The semiconductor lighting industry is in the early stage of development, with rapid changes in technology routes and rapid improvement in product performance, making the pace of some product standards unable to keep up with the development of product performance, and the development of basic standards such as reliability test methods requires more in-depth research, standard Formulation also requires a longer period.
The lack of national standards has caused frequent problems in the disorder of the industry.
Recently, the Guangdong Provincial Bureau of Quality Supervision released the results of provincial-level special supervision and inspection of the quality of LED light products in Guangdong Province. The sampling results showed that in the batch of 23 batches of self-ballasted LEDs, 17 batches were rejected, and the failure rate was as high as 73.9%. It is understood that the unqualified project involves accidental contact with the protection of live parts, insulation resistance and dielectric strength after wet treatment, mechanical strength, fault condition, color tolerance, general color rendering index, disturbance voltage, lamp power, heat resistance Sex, interchangeability, power factor, initial efficacy / luminous flux, fire and flame protection. The data shows that 70% of current LED product failures are caused by the core component---drive power problem.
The news about the failure of LED lighting products testing has appeared many times in the near future. As an inevitable trend in the development of lighting, why do the LEDs and quality policies support the project? Tracing back to the source, the lack of LED lighting standards is the key. From the power supply to the finished product, there is no standard system for LED lighting, and there is no requirement for mandatory testing and certification. It is completely how the enterprise wants to do it, and the quality is not good.
For the LED industry to develop healthily, it is inseparable from product standards and technical supervision. In the lighting industry, the phenomenon of foundry is very serious, including many large-scale brand companies are doing a lot of OEM. There are OEMs in international brands including Philips, Osram and NVC. Some big brands once had nearly 90% of OEMs. There is nothing wrong with the foundry itself, but the foundry is likely to cause problems in the management of the foundry. The reason for the problem of brand products is not the OEM model, but the brand enterprises have problems in the process of acceptance of OEM products. If the brand enterprise sends people to stay in the foundry for a long time, supervise and inspect the production process of the foundry, if it has problems, it can be found in time and reworked in time. If the product fails, it will be rejected. This will basically eliminate the unqualified products in the foundry process. appear.
The call for national standards for LED lighting is a topic that has been discussed in the industry. Although local governments have already developed and tried their own local standards, but the standards are confusing, the company is qualified according to the standards, and it has become unqualified there. The whole industry is in a mess! The government is in a dilemma. The company shakes its head and sighs. The people look at the flowers in the fog. They don’t know who is right or wrong, who is right and who is wrong, who is good and who is bad. Due to the lack of uniform specifications and standards, LED lighting applications on the market today have a wide variety of products, different performance, and poor interchangeability, which brings severe challenges to the entire industry.
The success of the LED industry standard lies in scientific
At present, there is no uniform standard for China's LED industry. More than 4,000 companies in the existing industrial chain, including 22 domestically listed companies, because there is no standard, the products are also mixed.
Yue Ruisheng, secretary-general of the International Semiconductor Lighting Alliance (ISA), said that the International Commission on Illumination, the International Electro-Electrical Committee, the European Commission for Light Engines, the US Energy Star, and the ISA are all setting standards for LED lighting to compete for industry voices. The key to the success of standards lies in science and practicality. At present, the reason why LED lighting standards have always been a bottleneck problem that plagues the development of the industry, the main reasons are: First, the semiconductor lighting industry chain is long, is the intersection of electronic information and light industrial lighting, its application is more extensive, giving Standards development and coordination have brought great challenges. Second, some of the LED standards are covered in traditional lighting products. For example, some standards for street lamps and street lamps may also be LED standards. Third, “standards†are science and technology. Based on the combined results of experience. The semiconductor lighting industry is in the early stage of development, with rapid changes in technology routes and rapid improvement in product performance, making the pace of some product standards unable to keep up with the development of product performance, and the development of basic standards such as reliability test methods requires more in-depth research, standard Formulation also requires a longer period.
The lack of national standards has caused frequent problems in the disorder of the industry.
Recently, the Guangdong Provincial Bureau of Quality Supervision released the results of provincial-level special supervision and inspection of the quality of LED light products in Guangdong Province. The sampling results showed that in the batch of 23 batches of self-ballasted LEDs, 17 batches were rejected, and the failure rate was as high as 73.9%. It is understood that the unqualified project involves accidental contact with the protection of live parts, insulation resistance and dielectric strength after wet treatment, mechanical strength, fault condition, color tolerance, general color rendering index, disturbance voltage, lamp power, heat resistance Sex, interchangeability, power factor, initial efficacy / luminous flux, fire and flame protection. The data shows that 70% of current LED product failures are caused by the core component---drive power problem.
The news about the failure of LED lighting products testing has appeared many times in the near future. As an inevitable trend in the development of lighting, why do the LEDs and quality policies support the project? Tracing back to the source, the lack of LED lighting standards is the key. From the power supply to the finished product, there is no standard system for LED lighting, and there is no requirement for mandatory testing and certification. It is completely how the enterprise wants to do it, and the quality is not good.
For the LED industry to develop healthily, it is inseparable from product standards and technical supervision. In the lighting industry, the phenomenon of foundry is very serious, including many large-scale brand companies are doing a lot of OEM. There are OEMs in international brands including Philips, Osram and NVC. Some big brands once had nearly 90% of OEMs. There is nothing wrong with the foundry itself, but the foundry is likely to cause problems in the management of the foundry. The reason for the problem of brand products is not the OEM model, but the brand enterprises have problems in the process of acceptance of OEM products. If the brand enterprise sends people to stay in the foundry for a long time, supervise and inspect the production process of the foundry, if it has problems, it can be found in time and reworked in time. If the product fails, it will be rejected. This will basically eliminate the unqualified products in the foundry process. appear.
Today let`s talk about touch screen laptop. Sometimes people take Yoga Laptop or 2 In 1 Laptop or 360 Laptop as foldable touch screen laptop. Cause the later ones usually with touch screen function. The difference is that touch screen laptop specials can`t be flipped up to 360 degree, usually 180 degree. Do you think which kind of person love 2 in 1 touch screen laptop more? Business people is the right answer, cause they care more performance, touch screen function, 180 rotating, which are the very important points for businessman, especially teaching in person, do presentation, etc.
Do you think what other business laptop businessman love also except touch screen laptop under 20000? 14 inch 11th Laptop and 15.6inch 11th or 10th Laptop should be the top levels.
As a professional manufacturer, also customizing Android Tablet, Mini PC , and all in one except laptop. So believe you can always get the most competitive one at this store, balancing the quality and cost at top.
Any other special demand, you can just contact us freely. Will try our best to back you up.
Touch Screen Laptop,Touch Screen Laptop Specials,Touch Screen Laptop Under 20000,Foldable Touch Screen Laptop,2 In 1 Touch Screen Laptop
Henan Shuyi Electronics Co., Ltd. , https://www.shuyicustomlaptop.com