Overview and function introduction of heat meter

Winter is coming, and heating is coming up in every household, and there is a product called "heat meter" that comes into people's sight with the heater, but most people don't know much about heat meters, then Today I will take you to understand what a heat meter is.
The heat meter is a tool used to calculate the heat dissipated by the radiator in the user's home. It is worth mentioning that it calculates the actual heat energy consumed by the user, excluding the loss of the pipeline and the allocation of the total table. The heat meter is installed on the heating pipe and consists of three parts: flow sensor, temperature sensor and calculator. Among them, the temperature sensors are paired, which are installed at the inlet and outlet of the heat exchange, respectively, to measure the temperature of the inlet and outlet and give the corresponding temperature signal; and the flow sensor is installed at the inlet pipe to measure hot water The flow rate; the calculator will collect the values ​​measured by the flow sensor and the temperature sensor, calculate it, and finally get the required value.
The method of using the heat meter to calculate the user's heat is different from the traditional area-based charging. The heat meter implements the household measurement method. The calculated value is scientific and fair, and the heat required Pay more heating fees if you want more. It ’s very simple. Everyone can understand it and use it with confidence. At the same time, you can freely control the actual amount of heat you can get. Cause a waste of resources.

Low Voltage Unarmoured cable

Low Voltage Unarmoured cable is a type of electrical cable that is used to transmit electrical power from one location to another at a voltage level of less than 1000 volts. It is typically used in applications where the cable will be installed underground or in areas where it may be exposed to moisture, chemicals, or other harsh environmental conditions.

The cable is made up of a number of individual conductors that are insulated with a low voltage insulation material, such as PVC or XLPE. These conductors are then twisted together to form a cable core, which is surrounded by a protective sheath made of PVC or other suitable material.

Unlike armoured cables, which have a layer of steel or other metal armour to protect the cable from physical damage, unarmoured cables rely on their protective sheath to provide mechanical protection. This makes them lighter and more flexible than armoured cables, but also less resistant to damage.

Low Voltage Unarmoured cables are commonly used in a variety of applications, including power distribution, lighting, and control systems. They are available in a range of sizes and configurations to suit different requirements, and can be customized to meet specific needs.

Low Voltage XLPE Insulated Cable,Low Voltage Direct Burial Cable,Pvc Earthing Copper Cable,Unarmoured PVC Low Voltage Power Cable,Low Voltage PVC Sheathed Non-Armoured Power Cable

Ruitian Cable CO.,LTD. , https://www.rtlinecable.com

This entry was posted in on