Hongli Optoelectronics (300219.SZ) announced on the evening of June 6, 2016 that the company received a written resignation request from Mr. Lei Lining, the company's director and general manager.
Hongli Optoelectronics stated that Mr. Relining’s resignation from the above positions will not affect the normal operation of the company’s related work. According to the "Company Law", "Articles of Association" and other relevant regulations, Mr. Lei Lining's resignation did not result in the company's board of directors being less than a quorum, its resignation will not affect the normal operation of the board of directors, the company will be elected as soon as possible in accordance with relevant regulations and appointed The new general manager, before the appointment of the new general manager of the company's board of directors, was temporarily chaired by the chairman of the board, Mr. Li Guoping.
In October 2013, it was Li Guoping’s nomination. Lei Lining, then the former deputy general manager of the company, was hired as the general manager of the company by Hongli Optoelectronics.
In the past three years, Hongli Optoelectronics has developed rapidly and successfully built the ecological chain of “LED+Internet Finance+Car Networkingâ€. “Since its listing in 2011, Hongli has been actively looking for opportunities to integrate industry and industry through outsourcing. High-quality companies upstream and downstream of the chain." Relining once told "High-tech LED", and Hongli Optoelectronics has been doing this.
According to public information, Lei Lining, male, born in 1973, Chinese nationality, without permanent residency abroad, graduated from Hubei University of Technology with a master's degree. He has worked for Beijing Baifu Group, Sanjiangyuan Ecological Environmental Protection Co., Ltd. and Lanzhou Lianqiang Gome Co., Ltd. Since May 2008, he has been working in the company. He is currently the executive deputy general manager of the company and the director of the second board of directors of the company.
A person familiar with Hongli Optoelectronics revealed that "as the announcement said, this does not affect the normal operation of the company and has nothing to do with the industry."
Indeed, from the perspective of the stock market, Hongli Optoelectronics' stocks on June 7 basically did not fluctuate, closing at 14.32 yuan, - 0.02.
In the record of investor relations activities disclosed on May 23, Hongli Optoelectronics expects that the LED market will continue to maintain an upward trend this year. In the first quarter of 2016, the company's business scale continued to grow, and its main business maintained a steady growth.
In fact, since the beginning of this year, the executives of LED companies who have resigned are far more than one of Raylining. Gaogong LED has read the public information of the major listed companies and found that resignation is not small, but for personal reasons, there is no Similar to the resignation of large-scale executives like Foshan Lighting last year.
As the price of LED products declines, lighting demand rises and product penetration increases. The short-term price decline affects the profitability of enterprises, but in the long run, it is conducive to the sustainable development of industries and enterprises. When the LED industry has crossed the lowest valley and began to slowly restore rationality and health, the resignation of executives may be just a better development for the company and the industry.
Duan Shang Optoelectronics (002638) Deputy General Manager Duan Cast:
Qinshang Optoelectronics announced on the evening of May 27 that the board of directors of the company recently received a written resignation request from Mr. Duan Casting, the deputy general manager.
According to the announcement, Mr. Duan Zhuan applied for resignation as the deputy general manager of the company for personal reasons, and he will no longer hold any position in the company after resigning. According to the "Company Law", "Guidelines for the Standard Operation of Listed Companies of the SME Board of Shenzhen Stock Exchange" and the "Articles of Association", the resignation report will take effect from the date of delivery to the board of directors.
Li Haijun, Secretary of the Board of Directors and Deputy General Manager of Changfang Group (300301)
The Changfang Group announced on May 17 that it had recently received a written resignation report from the company's board secretary and deputy general manager Mr. Li Haijun. For personal reasons, Mr. Li Haijun applied to resign from the company's board secretary and deputy general manager. After resignation, Mr. Li Haijun will not Re-elected as the company's senior manager
Ai Bensen (300389) Securities Affairs Representative Yuan Jianchuan:
Shenzhen Ai Bisen Optoelectronics announced on the evening of May 27 that the board of directors of the company received a written resignation report submitted by Mr. Yuan Jianchuan, a securities affairs representative, on May 27, 2016. Mr. Yuan Jianchuan applied for resignation as a representative of securities affairs for personal reasons. The above resignation report will take effect from the date of delivery to the Board of Directors. Mr. Yuan Jianchuan will no longer hold any position in the company after he resigns.
Tiantong Shares (600330) Director Wu Xiang
Tiantong shares announced on the evening of April 12 that the company's board of directors received a resignation report from the director Mr. Wu Xiang. Mr. Wu Xiang applied for resignation as a director of the sixth board of directors of the company due to work transfer. After resigning, Mr. Wu Xiang will no longer serve as a director of the company.
Foshan Lighting (000541) Director Chen Binghui
Foshan Lighting announced on the evening of April 7 that the board of directors of the company received the resignation report of Mr. Chen Binghui, the director of the company on April 7, 2016. Mr. Chen Binghui applied for resignation from the company's directors and committee members of the board of directors for personal reasons. Mr. Chen Binghui no longer holds any position in the company after he resigns. According to the "Company Law", "Guidelines for the Standard Operation of Listed Companies on the Main Board of Shenzhen Stock Exchange" and the "Articles of Association" and other relevant regulations, Mr. Chen Binghui's application for resignation will take effect from the date of the resignation report delivered to the Board of Directors.
Yuan Hua Optoelectronics (300306) Financial Director Wang Hua
Yuanfang Optoelectronics announced on the evening of April 18 that the board of directors recently received a written resignation report submitted by Mr. Wang Hua. For personal reasons, Mr. Wang Hua decided to resign as the company's chief financial officer. After resigning, Mr. Wang Hua will no longer hold any other positions in the company.
Liang Jian, supervisor of Lianjian Optoelectronics (300269)
Lianjian Optoelectronics announced on the evening of April 18 that the company's board of supervisors recently received a written resignation report from Mr. Jiang Wei. Due to the adjustment of job duties, Mr. Jiang Wei applied to resign from the position of supervisor of the Company. After resigning, Mr. Jiang Wei continued to serve as executive director and manager of Shanghai Youtuo Public Relations Consultant Co., Ltd., a wholly-owned subsidiary, and executive director and manager of Beijing Hezhong Junda International Brand Management Consulting Co., Ltd.
The resignation of Mr. Jiang Wei resulted in the number of supervisors of the company's board of supervisors being lower than the legal minimum number, and the employee supervisors of the company's board of supervisors were vacant. In accordance with the relevant provisions of the "Company Law" and "Articles of Association", in order to ensure the normal operation of the company's board of supervisors, the company held a staff representative meeting in the company's conference room on April 15, 2016. In the voting, Mr. Xiao Lianqi was elected as the employee representative to serve as the employee representative supervisor of the fourth board of supervisors (attached to the resume), and the term of office shall be from the date of the resolution of the employee representative assembly to the expiration of the term of the current board of supervisors.
Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.
Installing the batteries
Install 3.6V rechargeable Battcrics(NI-MH) . The purpose of the batteries is to store the total electricity and mcinory setting.
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutcs (2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours) and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will rc-caculatc. LCD on second line displays current power which ranges in 0.0W~9999W. LCD on third line displays the current electricity costs which ranges in 0.0cost~9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: l ime/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:0() again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000K WH 〜 9999KWII without other figures. LCD on third line displays''DAY''- "1 "will be showed on numerical part(thc other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untial the maximal cumulative time of 9999 days.
Mode 3: Time/Voltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V~9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ~9999HZ without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.
LCD on second line displays load current which ranges in 0.0000A~9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 1 .OOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 clones. LCD on second line displays the miniinum power which ranges in 0.0W~9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: I,ime/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W~9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line
displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without
other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line
displays the"O VER LOAD" with booming noise to warn the users,( 60470643,
60469303,selectable choice)
Supplemental informations:
1: Except tt OVERLOAD , ' interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third
line described in this intruction take section according to two black
lines on LCD screen. Here it added fbr clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&''Down" are in no function under un-setting mode.
Backlight Mode:
Connect to AC power,backlight im mediately light,if not press any button,backlight will went off in 15 seconds.
When press any of the buttonsbacklight
start light again. (Backlight only light when it connect to AC
power,backlight cannot light if use battery)
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting
more than 3 seconds(LCD on third line display system defaults price, eg
O.OOCOST/KWH ),the rendered content begins moving up and down which
means that the device has entered the setting mode. Then press FUNCTION
button to change selection and press UP/DOWN to set what you want. (On
pressing once, the figure after domical point will increase or decrease
accordingly. On pressing and hold-on, figures after demical point will
increase or decrease slowly in 2 seconds while figures change quickly
when hold-on time exceeds 2 seconds. When hold-on time reaches 10
seconds or more, the figures after demical point will stop while the
figures before demical point begin to increasing or decreasing.) After
that, press FUNCTION fbr swithing, then press [UP'nd "DOWN" button again
to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After
setting all above, press COST to return to Mode7 or it will
automatically return to Mode7 without any pressing after setting with data storage.
Power meter double rates, power meter two rates, cost rate socket, power meter cost rate, energy meter cost rate, cost socket, cost plug
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com