New multifunctional LED high current charge pump

AnalogicTech's new versatile LED flash high current charge pump, AnalogicTech, announces the AAT3174, a high current, high efficiency charge pump for multifunction LED applications. The new device greatly simplifies application design supporting flash and continuous mode by allowing designers to control LEDs with AnalogicTech's Simple Serial ControlTM (S2CwireTM) interface or RSET reset pin. This unique feature allows designers to achieve up to 800mA with an external resistor. The serial bus provides a powerful tool for driving LEDs, but it still requires designers to spend time learning how to program and develop solutions. Designers who want to quickly and easily develop solutions that support both flash and continuous mode operation can run the AAT3174 between two modes with a simple on/off trigger switch. The AAT3174 helps maximize power efficiency in a wide range of flare modes by using a combination of 1X, 1.5X and 2X three-mode charge pumps and internal detection circuitry. This allows the AAT3174 to provide higher efficiency than a simple double voltage (2X) charge pump. For portable applications with small footprints, the AAT3174 requires only four external capacitors (two 1F clamp capacitors and two small bypass capacitors on VIN and VOU) and a resistor that sets the maximum regulated output current. The device also provides a wide range of protection circuits, including thermal management systems that protect the AAT3174 in the event of a shorted output pin. In addition, it integrates a soft-start circuit that reduces the quiescent current to less than 1A by disconnecting the load from VIN, protecting the device from excessive inrush current during startup. With a specified operating temperature range of -40 degrees to +85 degrees, the AAT3174 is available in a lead-free 12-pin 3x3mm TDFN package. The unit price for 1000 pieces is $1.82.


1

Led Projection Lights China Manufacturer

Patented HDT technology: LED Projection lights  of the efficient copper heat pipe contacts directly with the heat

source in zero distance,which exerts the performance of the heat pipe to the best with a heat transfer rate over

200 times of the aluminum radiator.We choose material strictly: We adopt Philips,  Osram  or the United States Cree LEDS

as light source; drive power use Taiwan Meanwell or Philips. Ensure our LED Projection lights  long

 life and high luminous efficiency.

LED Projection lights


LED Projection Lights

Led Lighting Fixtures,Led Flood Lighting,Led Lights Of Ge Lighting,Led Projection Lights,Projection Lights

Changzhou Northern Lights Energy Technology Co.,Ltd. , http://www.lamps-china.com

This entry was posted in on