How to connect smart switch in smart home lighting system?

Many family's bedroom lights, in order to facilitate the switch, generally install the switch on the bedside, but the smart lights do not need this, because it can be remotely installed where you can easily installed, but the intelligent lighting switch must be installed wiring Only when it is installed, can we use it better. How to install the intelligent light switch?

How to connect smart switch in smart home lighting system?

1, bedroom wiring installation

When the general bedroom cabling is installed, there is a power outlet near the switch box, and the remote control switch of the intelligent lighting lamp is installed in the switch box. Two power wires, the live wire and the neutral wire, are drawn from the nearby power outlet and are respectively connected to the L and N terminals. The three wires on the switch are connected to the K1/K/K2 remote control switch of the intelligent lighting lamp. Note that the switch corresponds to the three terminals of the original switch. If the switch box on the bed is not easy to receive power, the switch box in the bedroom door can be easily accessed. To the power supply, the remote switch of the intelligent lighting lamp can be placed in the door switch box, and the wiring cannot be changed.

If there is no power in the vicinity, consider from the lighting lamp, from the lamp through a line to the bedroom door switch box, and then connected with the zero line at the lamp, then you can install the above connection .

2, single fire intelligent lighting switch

Single fire intelligent lighting lamp remote control switch is easy to install, standard 86 type wall switch, no need to receive zero line, no need to change the lamp, can directly replace the original wall switch (applicable to connect fluorescent lamp, energy saving lamp, incandescent lamp, spotlight, Halogen lamps and other common lamps).

3, zero intelligent lighting switch

Fire zero intelligent lighting lamp remote switch installation does not need to re-wiring, no need to change any accessories on the lamp; when used, select the desired lighting group, long press the anti-theft key for 5 seconds, the selected lamp group will flash twice, extend After 60 seconds, the selected lamp group is extinguished. At this time, the lamp has entered the anti-theft working state; two-way control, mutual interference!

In addition to the above several types of connection methods, there are many methods for installing the Wisdom Intelligent Light Switch. The specific method of installing the Wi-Fi Switch should be based on the type and function of the Wisdom Smart Light Switch. Dear friends, we must pay attention to safety issues when installing wiring to illuminate the light switch.

Related browsing

Article : What do you know about these advantages of home smart lighting?

Recommended : Voice-activated Smart Home Smart Home Benefits Modern Smart Home