[At the beginning] I thank you very much for your approval and support for the gaming mouse article. So at the end of the article, there is a little benefit. However, mechanical keyboards are different. Many enthusiasts have their own understanding of mechanical keyboards, and these understandings are often very different. It has caused fierce debates and even personal attacks. Therefore, this article hopes that everyone will use this as a reference. It is a good idea to buy a mechanical keyboard, and not to be used as a benchmark for selection. It is best to go to a physical store to experience the conditions. Fan, after all, is the best for himself.
ã€Reading suggestions】
Compared to gaming mouse articles, mechanical keyboard articles involve a wide range of issues. If there is any controversy or mistake, welcome to leave a message under the article and I will correct it as soon as possible. I will also try my best to answer the questions raised by valued friends. Also keep a summary of the words under each heading, for those who don't look too long.
The article is mainly composed of the following aspects:
Explain the impact of the various parts of the keyboard on the keyboard feel, how to choose a suitable mechanical keyboard.
What are the elements of the keyboard is not worth buying?
Talk about some famous brands (cherry/razer/piracy/filco/ikbc/ cutting-edge brands)
Talk about what niche brands are worth watching.
[Fanwai] Why don't I like RGB?
[The lucky draw and update notice] The end of the text small welfare and update the notice.
First, the impact of several major parts of the mechanical keyboard on the feelFirst of all, the conclusion is that the feel of the mechanical keyboard is based on the axis of the shaft. Touch, sound, and vision are all affecting people's feelings about the mechanical keyboard.
Let's talk about an important term "meat": The word "meat" is widely used to describe the feel of a mechanical keyboard. This feeling is finally explained by someone who can metaphorically explain it. That is, "the rebound speed of a keycap is slow." People's perception of the speed of button rebound is mainly the shaft spring, the weight of the keycap, and even the sound and touch.
Speaking of sounds, I remembered a previous discovery that when I was trying out meat and meat, I removed the PLU87 box and the shift wire's wire balancer, and then magically discovered that the feel of the meat had changed. My own analysis may be because the PLU87's workmanship is rather poor and the big keys are very loose. When tapping, the steel wire and the shaft emit a relatively crisp sound, so the feeling is that the balance bar is more brittle.
Therefore, the establishment of a touch is a collection of various senses, including tactile, visual, auditory, and even price and other people's evaluation are affecting the establishment of a keyboard feel.
1. Shaft
Summarized in one sentence: I will never post to you a couple of bad pictures and texts that will be used to give you a feel for the XX axis. I just want to say that this thing is to buy a test shaft or go to the entity. The store presses itself, and I can't tell what axis is right for you by letting you look at the screen.
“What axis is suitable for beginners?†“What axis does the game play?†I believe all the mechanical keyboard gamers have been impatient with this type of problem. Many people also give their own understanding to New Burns again and again, but I What I want to say is: Cherry does not have a mechanical axis built specifically for the game (except for the new silver axis), and there is no one axis that is suitable for everyone.
I don't know when the mechanical keyboard became synonymous with the game keyboard. It didn't seem to be embarrassing to say that I was a game keyboard. However, Cherry's MX Axis didn't even think about the game at the beginning of the design, but only considered the higher lifespan and better feel, and provided an excellent experience for text entry. In the game, the membrane keyboard can provide shorter keystrokes to increase the trigger and rebound speed. Some people may say that the membrane keyboard will have key conflict, but this is all in 2017, and now the membrane keyboard can also provide full-key punch-free.
Before the silver axis comes out, there is another saying that the black axis is suitable for games. This statement comes from Sairui 7G. At that time, Sairui launched the world's first "game mechanical keyboard" 7G, and 7G is the use of the black shaft, a time when the black shaft = game axis is very rampant, even later razer black widow because of the use of the green shaft full Affected by rickets. Prior to the listing on the red axis, people said that because the black axis “has no sense of going straight and straight,†it can be triggered faster. After the red axis with no sense of passage is listed, some people say that the pressure on the black shaft g is large and the rebound is fast. So suitable for games! Emmmmmmmm, you said very reasonable, then why not choose DT35.
Maybe there are still many people who ingrainedly think that the black axis is the game axis, not that the black axis is not good, but I hope that everyone will not be blindly misled by the online remarks, this thing is the easiest to experience, just go to the store One will know what suits you.
However, I still want to talk about my own understanding of these axes. Of course, if you feel a little bit, then you can skip this paragraph.
The tea axis keyboard is PLU87. This is my favorite axis. When I just got my hands, I felt not brittle and very fleshy. However, with such a long time, the wear was severe, but I felt better and crisper. , but there is no strong sense of passage of the green axis, took out a keyboard of their own. . . Haha
Black axis keyboard is ducky 2087s Black shaft is not used before used always listening to others black, that the black shaft is very hard, but in fact the feeling of the black shaft is a very Q bomb feel, 60g is indeed a very reasonable pressure, making It will not be very hard when it hits the bottom.
The red axis keyboard is ducky 2087 To tell the truth, I personally do not like the feel of the red axis of the steel plate, 45g pressure is not much lighter, and the bottoming feeling that brings it is relatively stiff, the keys are hard and stuffy, and this feeling is described This is the "meat", originally thought that only the red axis of ducky would be more flesh. Later, after using the pirate ship's K70, it was found that the red axis was indeed such a feeling.
The Green Axis Keyboard is the first edition of the black widow TE. It is not used to the beginning of the green shaft. It feels like the ballpoint pen has an unpleasant stickiness. It took a day to seal up and eat the ash until it was later. Time for a variety of reasons only the keyboard can be used, it took a week of high-intensity, may be due to run out of the reason, and later I feel pretty good, I am now using this when the article is used Black widow TE.
In a word, the black tea green shaft is recommended to choose the steel plate, and the red silver shaft is recommended to choose the steel plate.
There are steel and non-steel fingers in the shaft fixing method. The original design of the cherry shaft is directly fixed on the PCB. However, in addition to the cherry, more manufacturers choose to use the steel plate to fix the shaft. The biggest advantage of using the steel plate fixing is that it is not easy to use. Axis, such as tea green, which has a sense of passage on the axis, is also relatively crisp.
Just talking about the hand, the first PCB has a fixed advantage is that the PCB is a certain degree of toughness, such as red silver, which is easy to touch the bottom of the shaft, the PCB is fixed on the keyboard is more flexible, unlike I use ducky At 2087 and K70, the kind of stiff bottoming feel, some people even called G80-3494 as the only red axis.
There is a steel keyboard feel complex, the keyboard size, the thickness of the plate will also affect the feel, give a chestnut, the following non-mainstream color cap is Gaussian 87, compared to PLU, Gaussian keyboard plate is thinner, the feeling is touch After the end, it is not as crisp as the PLU sound, which means that it is more meaty.
3. Balance bar or satellite shaftThis is actually nothing to say. It was said at the very beginning that the balance bar is brittle and the satellite shaft is meat. The advantage of the satellite shaft is that it is easy to disassemble the keycap, which is more stable than the balance bar and is suitable for obsessive-compulsive disorder. But this is not absolute, and some balance bar keyboards are also very meat.
4. Keycaps (regular keycaps/special keycaps)
In a word: ABS is not so unbearable, PBT has not blown so god, so do not tangled up what the keyboard is the standard keycap.
ABS is cheap and easy to hit oil PBT is not easy to oil POM is good. . . . . But what I want to say is not this.
(1) Regular Key Caps ABS: Many people are affected by the Internet, thinking that ABS is easy to oil, and cheap goods are not worth mentioning, but as far as my personal feelings are concerned, ABS is more crisp and more tactile. Like filco and DAS, which are known for their excellent feel, ABS key caps are also widely used in medium and high-end keyboards of international manufacturers.
PBT: The most used PBT is the domestic keyboard, of which I used ikbc two-color PBT and Gaussian original PBT, the touch is relatively dry, and the sound becomes stuffy after loading PLU87, which is changed meat, Gaussian 87 PBT It is almost the same feeling. Moreover, the domestic PBT key caps generally do not work, and the burr nozzles are obvious. The most recent high-end brand leopold uses PBT caps.
POM: Seriously, POM I haven't used it for a long time. One reason is that because POM has no other high-volume brands other than the cherry G80 series, and POM is difficult to color opaque because it can't be done with rainbow keycaps. The POM keycaps are also very few. In summary, the POM is no longer studied in detail. However, it is worth mentioning that cherry's new MX series has added a backlight, and the keycap has also changed from POM to ABS. Therefore, the use of POM keycaps is becoming less and less. The POM material itself feels a little slippery and feels as good as ABS.
(2) special keycaps Thickening PBT: Not quite knowing why this keycap was made, the durability of PBT material itself is very good, and after the thickening of the keycap is called the destruction of the paragraph, put on this kind of keycap's tea shaft and blue The shaft feels very fleshy.
Ball cap: simply said that the ball is a keycap, the specific interest can be Baidu, a retro-looking keycap, but thicker, but because the commonly used sublimation process is more expensive, feel is not outstanding, so if Personalization of the keyboard can be considered, daily use is not recommended.
Two-color transparent word PBT: It not only guarantees the durability of PBT, but also makes the font transparent, but it still has the problem of light leakage after the backlight is fully opened, and the two-color keycap is generally thicker.
No moments and side cuts: Maybe I am more hypocritical. I personally like no key caps, which can bring the purest touch. The printed keycaps always feel a bit foreign body sensation. The two-color keycaps are much better, but I still feel inferior. No time so clean. So I personally prefer no keycaps.
Summarized in one sentence: the feel of the switch is not static, especially the shaft with a sense of passage, the feel will change with the use of time, but because of the axis of the POM material, with self-lubricating and create a sense of the highlight of the paragraph Parts will also wear out, so the shaft will be more smooth and smooth.
I'm sorry I'm really too lazy to take pictures, so I still use this picture as an example. The above PLU87 tea shaft was bought in 2011 and it took 5 years to photograph last year (mechanical keyboard really can be used for a long time). Here is the new Gauss 87 tea shaft (public model six years ago There is no difference with the current public model.) After I had tried all six people around, they were very sure that the two keyboards were quite different. PLU had almost no sense of passage compared to Gauss. But whether or not I have adapted to the reasons, I still prefer PLU's feel. The best axis I've ever used is the cherry green keypad for postal savings to enter passwords. It is said that it has been used for five or six years, and the process of light and crispy press has awkward physical friction. Can not help but lose more than a few passwords. . .
Therefore, the axis will become more and more suitable for oneself with the use of time. If you use a metaphysical language, it is "open."
Second, what are the elements of the keyboard is not worth buying?
Summarized in one sentence: with side macro buttons, non-cherry axis, non-MX axis. The degree of de-recommendation for newbies increases in turn.
This is really a lesson from blood. When playing games or even everyday use, CTRL will be used. I believe that everyone is left-handed to use the little finger to find the bottom-left key on the left. But in the keyboard with macro area, it is easy to press the macro key, and this row of macro keys is not used by most people, his function can be completely replaced by the game's built-in macro and multi-function keys of the gaming mouse. Is the side of this row of macro buttons where the pit, no matter which forum can hear novice to buy a keyboard with a macro key constantly press the wrong key mourning sound. . . However, it does not have any use, and it can only adapt to it.
Typical keyboard:
Black Widow Magic Edition As the initiator of the side macro area, this design can still be used now is really a courage.
Corsair K95 After the black widow pioneered the side macro area, it seems as if no macro area is embarrassed to say that he is a game keyboard, but the K95 can be said to be very powerful, not only inherited the K90's 18 macro keys, but also will change the film. Become a mechanical axis, perhaps the macro area is a game of representation, who's more macro key who is more gameplay.
Summarized in one sentence: Although the quality of the cherry shaft is also declining, the current cherry axis is still a benchmark.
Speaking of domestic MX axes, these two years have also grown a lot, but when it comes to feelings, people often see someone describe how "the XX axis and cherry axis feel like it" and "the xx axis is closest to the cherry axis." , But as a new fire, at least you should know what feels cherry, so here is still hope that everyone's first keyboard to buy cherry axis, be aware of.
Typical keyboard:
Kai Kui: Kaikuo, like other domestic entry-level brands, forged a low-price male-model cherry axis keyboard, but after turning to Kaihua's axis in the cherry limited supply in 2013, it was once hopeful that many people were optimistic about it. It was promising. Going to the high-end brand, but now this brand has no sound, JD did not even self-operation.
Sairui M650/400: Sairui, which used to create a game mechanical keyboard with 7G, is not even a fraction of Raytheon's monthly sales to the whole family. The M650 uses the QX2 axis which is cooperating with Kaihua. The people who buy this keyboard are too few and too few. I really don't have the courage to buy one and use it. I am afraid that even the second hand will not go out.
Razer Black Widow Series: The reason is still the same as the beginning, although I think the green axis feels more crisp than the cherry green shaft, but you also need to know what the cherry green shaft feels. . . . .
Yuemi mechanical keyboard TTC red axis version: because it is suddenly remembered, so no way to use mobile editing and mapping. This keyboard should pay particular attention to the fact that it is a rare mechanical keyboard that has flaws. In addition to adopting the TTC axis, it is said that there is a problem with the master control. After a quick press of a button, there is a high probability that a card key will occur. If you press twice quickly, you may only have one valid input.
Don't say too much about other homemade axes. Just look at the top graph.
The first thing to emphasize is that, as with non-cherry axes, non-MX axes do not equal differential axes, and non-MX architectures, including Logitech G-axis and ALPS axes, have their own strengths and strengths. But for beginners, the non-MX axis can not only establish a complete understanding of the mechanical keyboard, but also because these axes are not compatible with most third-party keycaps, so that the possibility of late playability and damage repair is greatly reduced. .
(1) Logitech G axis
Speaking of the G axis there are still many advantages, the key cap is stable, uniform light transmission, and feel is also OK, and the quality of cooperation with OMRON is also guaranteed, but does not understand why Logitech does not apply cross axis after the cherry patent expires . Logitech also began to switch back to the cherry axis on the new keyboard.
(2) Sairui QS1 axis
Just like the G-axis, Sairui did not know whether Shi Lezhi sold QX1 or QX2 after sales were disastrous. Not only did he use the cherry axis like the Logitech G610, but he also got a QS1 axis similar to the G-axis, and QS1 also Still cooperate with Kaihua, but the price is very Rui Rui, the use of this axis of the Sairui M800, the monthly sales of the flagship store 30 is only out of hand, can not be described as miserable.
For beginners, the above three types of keyboards do not increase the degree of recommendation for the novice to increase in order, it is not to say that these products are not good, and most of these designs are not used or that is suitable for the old burned cherry axis replacement For taste, novice or first buy cherry axis.
[FBI WARNING] This section of the high black warning, after reading you will find almost nothing to buy the brand.
1.cherry
Cherry is the inventor of the MX axis, but this does not mean that cherry's keyboard is the best ah, sony's sensor is still the standard for most high-end mobile phones. ZXP's camera is not as good as S8 and U11. When asking for recommendations, there are many people who do not have the brain to push the original factory, but when pushing cherry, we must also tell the shortcomings together, otherwise the newcomers will not be able to lose the road because of these problems.
As the old generation of G80 in the picture is flawed due to design flaws, the positioning column breaks easily during transportation. The simplest is to shake the keyboard and hear the sound of broken parts inside.
Why do we need to say positioning column first, because it was a hot thing in the past, probably it means that there was a user who bought the 1865 hand and found that the positioning column was broken, and the merchant refused to return the product on the ground of commonality, and the user sent it. At that time, the largest keyboard category was posted. Immediately afterwards, it was attacked by fans. "How did you not do your homework before you bought it?" "This keyboard is just like this, it doesn't affect the use." "You didn't do your homework, you still depend on the business." "Virgo. buy". . It is estimated that this cherry will be moved to cry. The problem rarely seen on other keyboards is considered to be a normal phenomenon. This is also known as workmanship. Therefore, here first talk about the problem of broken positioning column, because this problem is not specifically to Baidu it is not easy to know that is a common problem. And the attitude of the original factory powder on this issue has caused many people to turn black in an instant. It can be described as true.
Of course, there is another way of saying that the axes used by Cherry for itself are better than those for other manufacturers, so the original keyboard is invincible. . . . EXM? Is cherry still picking up physique from the output of tens of thousands? ? ?
<2>MX2.0/G80-3800
MX2.0 can be regarded as a keyboard for every person who must be black, half-height chest keycap, single-layer PCB (before the cherry's steel-free keyboard are 6-layer PCB), from POM to ABS keycap, the key is it Still ugly! In addition to single-layer PCBs, half-height caps are also a factor that affects hand feelings. If you really want to use them well, you must at least replace them with full-height keycaps or hand rests, and either one of them is around 200, plus 400+. The keyboard is almost as fast as the G80-3000. However, MX2.0 relied on the “lowest price†of the “original faith†and two gold-lettered signs for long-term sales.
(Pictures from the Post Bar Users @ Feathered Six Six)
As shown in the figure, MX6.0 is used as a new-generation game mechanical keyboard for cherry. The production is changed from the Czech factory of the old generation G80 to a Chinese factory. It also changed from no steel to steel, and MX6.0 is not like G80 and MX2.0. , MX6.0 general axis off the lights off the paint is very easy to find, but also the attitude of the buyer is also very good, out of paint oxidation keyboard warranty period can be replaced for free on the new shell, if you like this appearance is not Mind you often change the shell can consider MX6.0.
[Small fan] game mouse articles have a lot of value friends leave a message asking how the cherry's mouse, cherry's mouse is the earliest buy keyboard gifts, if you remove the logo is the standard 9.9 e-sport gaming mouse, in addition to the lowest end do not know the model The optoelectronic engine of red light is not used by Cherry's own home. It is huano's fretting. Now it is sold for the purpose of harvesting a wave of faith. Do not understand how precise the German craft is now like this.
2. Razer
Speaking of razer, it must say snake axis first. Razer never recognized the green, orange, and yellow axes as OEM products. In 14 years ago, Razer's black widow was using the cherry axis, because the sales volume of Razer was too large to keep up with the production capacity of the cherry. Razer stated that he would invest in the cherry and open up a production line, but it was produced. The axis can only be supplied to Razer, Cherry resolutely refused. Afterwards, razer put the money to Kaihua for a product line and Razer took control of the product. Together with the expiration of the MX-axis patent, only one year later, the black widow updated the 2014 version and replaced it with Razer. Grinding axis.
Razer has already said almost the same, that is, the high premium and non-cherry axis, but to say that the product seems to have nothing to hurt, at most people say that the repair rate is high.
The non-cherry axis is almost the same as above, so let's talk about the premium. In the past two days, when writing this article, we paid special attention to the sales. In the international big manufacturers, the sales of the Black Widow series are almost the same as the MX2.0. Like the latest Black Widows illusion version V2, the price of 1199 can be sold at a monthly rate of over a thousand, and the sales price of MX6.0 and K70RGB is less than half of that. . . Seeing this data, Min's heart is not only not volatile, but even wants to increase prices.
If you want to say how much razer's keyboard is overpriced, take a look at this picture, and the 2013 version of the black widow that I bought in 2013, which is also cherry's green axis, is as low as 650 at the lowest, and 2016 is not only less than The 13th edition has been upgraded, and even the shell work has shrunk. The 2013 imitation skin material and hidden indicator light are really beautiful, and 2016 has become the same frosted plastic shell + transparent plastic indicator light area, and
Similarly, with Logitech and Sairui on non-cherry axes, the monthly sales of the whole family are not even the same as those of razer. Even pirate ships that sell the same lights, the sales volume of cherry RBG is barely able to catch up with razer. Only MX2.0 wins on low prices. . What kind of magic is this to attract people to buy razer? . . .
3. Pirate ship
In fact, there is nothing to say about a pirate ship. It is to buy a lamp, work is okay, feels like a hand, and can only be achieved today with the exclusive supply of RGB signed by cherry and cherry. In addition to the keyboard, headphones and game mouse It can be described as a full-line crash.
On the picture is the K70 red axis red version, may be my table is relatively small, can not fit such a large keyboard, often drag the mouse to the keyboard, to say that the light, I turn off the light,,, feel It is generally relatively meaty, and there is no difference between the ducky2087 feeling of 399, because the original RGB axis used may be suitable for people who like lighting. After all, the salted fish like me have no pursuit, and even PLU can use it very happily.
Finally, Tucao one, the thieves you look at your home renderings color and razer renderings color, really can not use snacks, this even the cover is so no heart how can sell razer.
4.Filco
When it comes to filco, it is estimated that another person will spray me because domestic filco is also selling beliefs.
First, look at the price of Japan and Asia, the normal price of 10,800 yen, almost 650RMB, and the price of the domestic generation of the second generation is also similar, if you remove the impact of the recent appreciation of the yen, Japan's filco less than 600RMB, and in June Years ago, the domestic price was similar to that of Japan and Asia, and sometimes it was even cheaper. If the price of razer was globally expensive, then filco's price was completely domestically fired. When the generation of saints is lowest, it seems to be less than 600. And now the second generation of the price of the hand of the second hand has doubled faster than that of Japan, and the transit tax and fees of the Japan Sea Amoy are hundreds of dollars cheaper than domestic ones. The Cooler Master XT from the same factory is only half the price of filco.
Speaking of filco, this is a very metaphysical brand. When the story is about to be changed from one generation to the next, the generation of the saints and ninjas is discontinued. After the second generation comes out, the price is just higher than the first generation, but afterwards, I don’t know How did you pass out a generation of gold standard Bai Qing artifacts, and then Bai Qing said that he was very pleased and happy to start raising prices. When it was completely out of stock, it was already higher than the price of the second generation. Now the free fish has been 1,500+. , I may be more numb, I do not feel the same foundry, and the second-generation PCB material better, the function is also the same as a generation of gold standard no red, this and the generation is completely no difference ah, but a generation of gold standard Bai Qing is more speculation. . . .
5.iKBC
Ikbc is a brand of Taiwan's VortexGear. Ikbc is a VortexGear brand in China. VortexGear designed and produced most of KBT's RACE/PURE/ONE keyboards. Among them, the IKBC brand's poker and KBT's PURE share a common design, so many people think that IKBC is KBT's domestic vest or agent, but it is not.
The ikbc market is relatively niche, mainly in the face of peripheral enthusiasts, the keyboard is not sold as the main selling point, but to PBT, reserved lamp holes, convenient customization and other aspects as a selling point, but Feel is not bad, work is more general, with IBCC's PBT white green key cap as an example, glitches and nozzles are relatively rough, slightly less than other brands of work.
6. Cutting-edge brandHere is not a certain brand, referring to some brands that have suddenly been fired up, and often there are some new brands in the very short period of time be crowned with high cost performance, good workmanship, feel invincible such a name. This brand can't be said to be a pit, but there is always some promotion behind it. Therefore, for the sudden emergence of hot brands, it is recommended that you take a wait-and-see attitude.
Fourth, talk about what are worthy of attention niche brandsFirst of all, I haven’t used these things before, but I’m still concerned about the new technologies that have been developed by domestic manufacturers. Content is from the foreign assessment organization LinusTechTips.
1. Blood Wraith B770R
Shuangfeiyan's optical axis may be able to achieve a theoretical wireless life. If you want to surpass cherry, blindly relying on the imitation of the MX axis will not work. Shuangfeiyan is a very powerful manufacturer made in China, and I still feel very good. Those who are interested can understand for themselves, and others will not introduce more.
Shuangfeiyan blood hand ghost B770R optical axis backlight glare RGB game gaming cable real mechanical keyboard green axis 299 yuan Lynx featured to buy 2. Fuller 
This can not be bought, Fuller out of the electrostatic capacitor keyboard, the estimate is still a good name, it disappeared after two years out, and even did not see a few valuable assessments, I feel very sorry. Do not know what will happen to Fuller's light micro motion.
What are the shortcomings of [Overseas] RBG?The following is my personal opinion.
First of all, the mechanical keyboard is actually a product that is easier to start than a mouse. If you have some hands-on capabilities, you can even use the open-source GH60 to assemble a customized keyboard that is completely yours. The mechanical keyboard is also known as being able to use a lifetime. The structure is simple and reliable, but the reliability of the mechanical keyboard is getting lower and lower. In addition to the fact that the cherry axis is not controlled at all with the increase in output, the structure is becoming more and more complicated.
Take the K95 for example. There are 18 more optical mechanical buttons than others. There are also playback buttons, volume buttons, and other buttons, plus an RGB lighting system. There are too many parts, for example, a backlight on the keyboard is off but the button is normal, you say it is not a quality problem, but the problem of lamp off can not appear on non-backlit mechanical keyboard, is it not non-backlight machinery The keyboard failure rate is lower? The more complex the function, the higher the failure rate and the easier it is to have problems.
So I rejected this question on RGB. First of all, I am not crazy about the colorful Marquee. For me, buying an RBG keyboard not only has to cost more money, but also brings about a higher failure rate, so I purchased a mechanical keyboard. Still need to look at their own needs.
[draft and update notice]Really did not expect the game mouse so many valued friends rewarded, flattered, so close at 7.1 in the morning at 10 o'clock, from the value of the game played by the mouse mouse friends to pull 2 ​​packs of small-colored mother's rabbit meat or 2 packets of tossboy croaker Optional one. This time, I still draw a valued friend from the list of friends who valued this article. The result was given in the mouse pad. This time, I should draw a mouse pad. If there are too many people, then I will draw something else. .
Lucky draw process video
Lottery results: @ Wenhaha
Please take a look at the value of the friend and leave it with me @ to send it.
Color mother meat
Deep Sea Guardian Yellow Croaker
In fact, if you look at the lottery, you can see it. This article was written at the end of June, and then the intermittent amendments have been added. . .
Game Peripherals Series Next update of mouse pad articles, but the mouse pad update estimated to wait for a long time, because the last time the mouse pad lasted two years ago, this time to make up for a while. Ice Leopard and Microsoft I haven't thought about where to update, may update with the mouse pad, or may be updated in the G502 final evaluation, but I feel G502 to be eunuchs, because the current preparation is still slightly worse. But no matter where the update will be marked on the title.
There is a holiday right away, and you will open a pit of food and a food series. This is mainly to record some delicious but not well-known small restaurants. The main menu of the Garden Food is mainly mine. The scope is probably Sichuan and Gansu in Sichuan. In these southwest and northern regions of Heilongjiang Province, the one-person food series is the daily diet of the rich second-generation cohort.
Made of TPU material imported from South Korea, it can effectively protect the screen from unnecessary wear or scratches and reduce the impact of falling.
The flexible material design allows the Screen Protector to adapt to the contours of any device, so it can be connected to curved displays and rounded edges. The Full-Cover Screen Protector can perfectly fit your screen and provide maximum protection.
The oleophobic coating technology protects the glass from fingerprints left by sweat and grease, and fully supports the 3D touch function on the iPad.
The ultra-transparent thickness of 0.14mm ensures the sensitivity of the original touch screen. When using Apple Pencil, it can still maintain a high touch sensitivity. 99% transparency provides an ideal natural viewing experience.
If you want to know more about Imported Screen Protector For iPad products, please click the product details to view the parameters, models, pictures, prices and other information about Imported Screen Protector For iPad.
Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about the Imported Screen Protector For iPad!
Screen Protector For iPad, Imported Screen Protector, 200*300 Screen Protector, Imported Protective Film, iPad Screen Protector,Imported Hydrogel Film
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jonsun-sz.com