(1) Before the welding work begins, the welder and the tool should be checked first to be fragrant and reliable. If the insulation of the welding tongs and the welding cable is damaged, the grounding of the outer casing of the welding machine and the contact points of the welding machine are good. It is not allowed to start operations without checking.
(2) When working in tight spaces, ship warehouses, containers and pipes, in order to prevent electric shock, it is necessary to wear insulated shoes, rubber sheets or other insulating village mats under the feet; Zui good two people work alternately to look after each other. Otherwise, you need to have a guardian to pay attention to the operator's situation at any time. In case of dangerous situation, immediately cut off the power supply for rescue.
(3) When the body is sweaty and the clothes are wet, do not lean on the charged steel plate or workpiece to prevent electric shock.
(4) When the working place is wet, the floor should be covered with rubber sheets or other insulating materials.
(5) Wear leather gloves when replacing the electrode, do not operate with bare hands.
(6) In the case of electrification, in order to prevent the welding tongs from being clamped, the workpiece to be welded or the welding cable is hung on the neck.
(7) When pushing and pulling the knife switch, the face is not allowed to directly face the electric gate to prevent the spark caused by the short circuit from burning the face.
(8) The following operations must be performed after the power is turned off:
When changing the welder joint; when the replacement weldment needs to be changed to the secondary circuit; when the safety device is replaced; when the welder fails, it needs to be repaired; when the work place is transferred to move the welder; when the work is completed or temporarily leaves the work site.
Portable Battery ,Portable Power Bank,Portable Battery Pack,Portable Power Pack
Zhejiang Casnovo Materials Co., Ltd. , https://www.casnovo-new-energy.com