Self-lighting self-closing controller circuit for advertising lights

5050 green light LED 5050 lamp green light green light pure green super bright LED sticker
Manufacturers supply LED lamp bead SMD LED 0805 yellow light super bright indicator light dedicated
Probe domestic switch needle KG300B head diameter 3.0 normally closed switch needle total length is 5

Self-lighting self-closing controller circuit for advertising lights

The self-Lighting self-closing controller circuit for the advertising light is shown in the figure.
The working principle is as follows: IC1 and peripheral components are used as light control switches. Due to the small R2 illumination resistance during the day, the 2 and 6 feet of IC1 are higher than the potential, the 3 feet are at a low potential, and the relay J is not attracted. Points J-1 and J-2 are in the off position. At night, the resistance of R2 becomes larger, IC1 is 3 feet flipped to high potential, and relay J is attracted. After IC2 is powered, since the voltage on C5 is zero, the high potential of the 3 pin turns on the thyristor, and the advertising light ZD is on.



Lighting

SHENZHEN CHONDEKUAI TECHNOLOGY CO.LTD , https://www.siheyidz.com

This entry was posted in on